JD-ZLC-04 Multifunctional Electric Standing Hospital Bed
The JD-ZLC-04 Multifunctional Electric Standing Hospital Bed is designed to support care and standing-training routines in hospital, rehabilitation and bedroom settings. Its electric standing function allows the bed platform to tilt through an adjustable range, while a wired electric remote control provides the described one-button lifting operation. This arrangement gives care teams a direct way to adjust the bed for a standing position as part of an appropriate patient-care routine.
The bed combines an electric motor for medical use with a cold-rolled steel frame, a mattress and mobile lockable casters as standard accessories. Together, these features provide a configurable bed platform for everyday care tasks and supported standing. The product information specifies a loading capacity of 240kg and a bed size of 2140×980×500 (±20mm). These details help buyers compare the model with room layouts, care requirements and equipment plans without assuming additional specifications.
For facilities planning a bed for more than one care activity, the JD-ZLC-04 brings the standing adjustment, patient-fixing straps and mobile base together in one product. The optional bedside cabinet, dining table and hospital visitor chair can be considered separately according to the intended room setup. This makes the bed relevant to care environments where standing practice, patient positioning and routine bedside use need to be considered together.
Specifications and included accessories
Review the specifications below when assessing whether the bed is suitable for a facility or care-room application. The stated adjustment describes the standing angle range; the stated capacity, size and material are provided as listed for this model.
Item | Parameter |
Bed Size | 2140×980×500 (±20mm) |
Standing Adjustment | 0°-85°(±5) |
Loading capacity | 240kg |
Material | Cold-rolled steel frame |
Standard Accessories | 1. Mattress 2. Wired electric remote control 3.Electric motor for medical use 4.Mobile Lockable Casters |
Optional Accessories | 1. Bedside cabinet 2. Dining Table 3. Hospital Visitor Chair; |
The mattress, wired remote, medical-use electric motor and mobile lockable casters are listed as standard accessories. A bedside cabinet, dining table and hospital visitor chair are listed as optional accessories. This distinction is useful when preparing a purchase specification: confirm which accessories are required for the intended use and include optional items in the order only when needed. The listed information does not specify further configurations or functions for those accessories.
Electric standing adjustment and operating features
The electric tilting system offers a standing adjustment range of 0–85° (±5°). The bed is described as using one-button lifting through the remote control, making the adjustment straightforward for a caregiver operating the control during a planned position change. Its slow and stable tilt speed is intended to help avoid sudden angle changes that could cause dizziness in patients. A red emergency stop button is provided for immediate power cutoff in abnormal conditions.
These operating features can support a more controlled transition between a resting position and standing training when used as appropriate for the patient and care plan. Care staff can use the remote to manage the tilt while attending to the patient, and the emergency stop offers a direct response option if an abnormal condition occurs. The adjustment range is a product specification, not a substitute for patient assessment or supervision; operators should follow their facility’s procedures and the applicable instructions for use.
0-85° Electric Tilting System
Multi-position Safety Fixing Straps
Patient positioning, mobility and care applications
Four groups of thickened soft sponge straps are described for chest, waist and thigh fixation. Their stated purpose is to distribute pressure evenly and help prevent slipping or sideways tilting during standing training. The soft strap surface is designed not to rub the skin, while the U-shaped leg groove follows the leg curve and is intended to reduce extrusion discomfort. These features support positioning during the bed’s standing function; the care team should select and use fixation in accordance with the patient’s needs and local care procedures.
The bed also has mobile lockable casters. Its four universal silent wheels have brake pedals and are described as convenient for moving between a ward, rehabilitation room and bedroom. Once the bed is in the desired location, the wheels can be locked to fix the table during use and help avoid sliding. This mobile-and-lockable arrangement can be useful when equipment needs to be repositioned as care needs change, while still allowing the bed to be secured for an activity.
Mobile Lockable Casters
For ongoing application, staff can check that the bed is positioned appropriately, the casters are locked when required, and straps and controls are ready for the intended activity. Keep the bed and accessories clean and follow the facility’s routine inspection and maintenance procedures. These general care practices help staff keep the equipment prepared for use without implying maintenance intervals or additional technical requirements not stated for this model.
Overall, the JD-ZLC-04 combines electric standing adjustment, supplied patient-positioning features, a cold-rolled steel frame and lockable mobility in a multifunctional hospital bed. It can be considered for hospital wards, rehabilitation rooms and bedroom care environments where these stated functions match the intended application. Review the listed size, 240kg loading capacity, adjustment range and accessory selection as part of equipment planning, and use the bed under appropriate professional supervision.