JD-YLC3-07 3 Crank Manual Hospital Bed Overview
The JD-YLC3-07 is a three-crank manual hospital bed designed to support day-to-day patient care in hospital wards, care facilities and home-care environments. Its mechanical adjustment system allows caregivers to change the bed position using the cranks rather than electrical controls. This offers a practical option for care spaces that need manual operation, while enabling adjustments to the backrest, leg rest and overall bed height.
With separate backrest, leg-rest and overall lift adjustments, caregivers can select a suitable position for rest, feeding or rehabilitation activities. The stated backrest adjustment range is 0°-80°(±5), and the leg-rest adjustment range is 0°-35°(±5). The overall lift and down adjustment is 460-660mm (±20mm), allowing the bed height to be adjusted to support different care tasks. Actual positioning should be selected according to the patient's needs and the caregiver's care procedures.
The bed size is 2140×980×460-660mm (±20mm), and its loading capacity is 260kg. These specifications help buyers assess the bed for their intended care setting and compare the available adjustment functions with patient-care requirements. The three-crank configuration provides manual control over the bed's listed functions without relying on electricity for adjustment.
Specifications and Included Accessories
Review the main dimensions, adjustment ranges, materials and included accessories below when planning a bed setup. The listed accessories provide key components for patient support, bed mobility and everyday care. Optional furnishings and rehabilitation equipment can also be considered for the needs of the room or care plan.
Item | Parameter |
Bed Size | 2140×980×460-660mm (±20mm) |
Backrest Adjustment | 0°-80°(±5) |
Leg Rest Adjustment | 0°-35°(±5) |
Overall Lift & Down Adjustment | 460-660mm (±20mm) |
Loading capacity | 260kg |
Material | Cold-rolled steel frame + ABS headboard |
Standard Accessories | 1. ABS Head and Tail board 2.Aluminum alloy Guardrails 3. 125 mm Silent Swivel Casters with Brakes 4. Mattress 5. Adjustable IV pole |
Optional Accessories | 1. Bedside cabinet 2. Dining Table 3. Hospital Visitor Chair; 4. Rehabilitation traction exercise frame; |
Standard accessories include ABS head and tail boards, aluminum alloy guardrails, 125 mm silent swivel casters with brakes, a mattress and an adjustable IV pole. Optional items include a bedside cabinet, dining table, hospital visitor chair and rehabilitation traction exercise frame. These options allow a facility or care provider to select complementary items based on how the bed will be used and the equipment available in the surrounding space.
Manual Positioning and Practical Care Use
The three-crank, three-function adjustment system uses a purely mechanical design and does not require electricity to operate. This can be useful in care environments where caregivers prefer manual adjustment or where the bed needs to remain operable without depending on electrical power. The cranks provide a way to change the patient’s position for routine care activities, including rest, feeding and rehabilitation positioning.
Backrest adjustment can help caregivers raise the upper body when a more upright posture is needed, while the leg-rest function provides a separate adjustment for the lower body. Overall lift and down adjustment changes the bed height within the specified range, which can help caregivers set up the bed for patient access and care tasks. Care staff should use the adjustment controls in accordance with the patient's condition and their facility's procedures.
The bed's wheeled base supports moving it between care areas when necessary. Its swivel casters are described as silent rolling wheels and include brakes; when the bed is in position, the brakes can be applied to help prevent it from sliding during treatment. The guardrails are designed to raise for patient-side protection and feature a quick-release design for lowering during transfers and medical examination. As with any patient bed, caregivers should confirm the bed and its brakes are appropriately set before care or transfer activities.
Aluminum alloy Guardrails
125 mm Silent Swivel Casters with Brakes
ABS Head and Tail board
Three Crank 3-Function Manual Adjustment System
Frame, Surfaces and Routine Maintenance
The JD-YLC3-07 uses a cold-rolled steel frame with an ABS headboard. The frame and bed components provide the structural basis for the listed patient loading capacity, while the head and tail boards complete the bed setup. Its cold-rolled steel frame is described as using perforated sheets that distribute pressure, provide sturdy support and allow air to circulate. The product information notes that this design can help reduce the risk of pressure ulcers for patients who remain in bed for long periods; it does not replace regular patient assessment or repositioning according to care guidance.
Cold-rolled steel frame
The ABS headboard and footboard are described as one-piece molded, wear-resistant, impact-proof and easy to wipe clean. This surface characteristic supports straightforward routine cleaning in medical and home-care settings. Follow the cleaning products and procedures approved for the care environment, and inspect the bed and accessories as part of normal maintenance. Check that adjustment controls operate as intended, guardrails can be raised and lowered, and caster brakes hold the bed when engaged.
The bed's combination of mechanical adjustment, movable casters, guardrails and cleanable ABS boards makes it suitable for care settings that require a manually operated patient bed with several positioning functions. Before selecting the model, compare the listed size, adjustment ranges and 260kg loading capacity with the intended room, patient and care requirements. Accessories can be selected to complement the bed's standard configuration without changing its stated specifications.