JD-DSY-28 2-Crank Manual Hospital Bed Overview

The JD-DSY-28 is a manually operated hospital bed designed to support patient positioning and everyday care routines. Its two hand cranks provide separate adjustment of the backrest and leg rest, giving caregivers a practical way to change the bed position without an electrically powered adjustment system. This configuration can be useful in hospital wards, care facilities, and other patient-care environments where straightforward manual operation is preferred.

The adjustable back and leg sections allow the bed to be set for different care activities, including feeding, infusion, and rehabilitation, as described for the product. For caregivers, changing these sections independently helps adapt the patient’s position to the task at hand. The manual crank arrangement keeps the adjustment controls on the bed itself, while the specified positioning ranges provide a reference for selecting an appropriate angle during routine care.

With a cold-rolled steel frame, ABS head and tail boards, foldable guardrails, and lockable swivel casters, the bed brings together a supporting structure and practical access features. A mattress and adjustable IV pole are included among the standard accessories. The combination is intended to serve as a functional bed setup for patient support and common bedside care activities.

Product Specifications

Review the listed measurements, adjustment ranges, load capacity, materials, and included equipment when assessing the JD-DSY-28 for a facility or care-room requirement. These are the stated product parameters and accessories; use them as the basis for comparing the bed with the intended room layout and care workflow.

The listed bed size and adjustment ranges help buyers consider placement and the positions available for routine care. The stated loading capacity and frame material provide additional reference points for product selection. Standard accessories are supplied as part of the listed configuration, while the bedside cabinet, dining table, visitor chair, and rehabilitation traction exercise frame are identified as optional accessories for buyers considering a broader bedside setup.

Manual Positioning and Patient Access

Double Crank Adjustable Mechanism

Two manual hand cranks independently control back lifting and leg bending, allowing multiple lying angles for feeding, infusion and rehabilitation. The separate controls let caregivers adjust the backrest or leg rest according to the immediate care activity. This arrangement is useful when positioning needs change during the day, while keeping operation mechanical and direct. The stated adjustment ranges are 0°-80°(±5) for the backrest and 0°-35°(±5) for the leg rest.

ABS Head and Tail board

The four-corner design is soft and provides cushioning and shock absorption. It features an integrated card slot for storing patient information. The head and tail boards form part of the bed’s standard configuration and provide a designated place for patient details, supporting identification and organization in a shared care environment. Their ABS construction is specified for the boards, alongside the cold-rolled steel frame.

Foldable guardrails support a balance between bedside protection and caregiver access. When raised, the rails provide a barrier intended to help prevent elderly patients and other patients from falling from the bed. Their foldable, retractable design allows caregivers to lower them when access to the patient is needed. The feature description identifies a quick-release lock, while the listed standard accessories specify foldable aluminium alloy guardrails.

Frame, Mobility, and Bedside Support

Foldable Safety Guardrails

Retractable stainless steel guardrails with quick-release lock, prevent elderly & patients from falling off bed; easy to lift and lower for caregiver access. Their foldable operation allows the side of the bed to be opened for care tasks and returned to a raised position when the barrier is required. This supports routine access without removing the guardrail assembly from the bed.

Perforated Ventilated Cold-rolled steel frame Bed

Oval hollow punched bed panels maximize air circulation, greatly reducing bedsore risks for long-term bedridden users.Firm bearing structure for long-term frequent use. The cold-rolled steel frame and perforated bed panels are intended to provide structural support while allowing air circulation through the bed surface. This feature is relevant when the bed is used for people who remain in bed for extended periods, alongside appropriate care and repositioning routines.

Lockable Silent Medical Casters

Four universal rolling wheels with independent foot brakes. Wear-resistant rubber tires lower moving noise on wood and tile floors; the swivel casters support repositioning of the bed, and the brakes can be applied to secure it when stationary. This mobility feature can assist with room organization and cleaning access. The standard accessory listing identifies 125 mm silent swivel casters with brakes.

Retractable IV Infusion Stand

Telescopic stainless steel IV pole with 4 hooks, adjustable height for infusion treatment, firmly mounted on bed head. Its retractable design helps keep the pole associated with the bed, while the adjustable height allows it to be positioned for infusion treatment. This pole is listed as a standard accessory, making it part of the supplied bedside equipment rather than an optional item.

The specified frame, perforated panels, casters, and IV pole provide practical features for daily operation. Together, these components support patient positioning, movement of the bed when required, and bedside infusion use. Buyers can also consider the optional accessories according to their facility’s needs: a bedside cabinet or dining table for bedside organization, a hospital visitor chair for visitors, or a rehabilitation traction exercise frame for rehabilitation applications.

For ongoing use, caregivers can operate the hand cranks as needed, check that the guardrails are properly positioned, and engage the caster brakes when the bed is stationary. Routine inspection and care of the moving and locking components can help maintain readiness for everyday use. The manual design and listed accessories make the JD-DSY-28 a configurable option for care teams seeking a two-crank hospital bed with independently adjustable back and leg sections.