JD-DSY-17 / 1 Crank Manual Hospital Bed

The JD-DSY-17 is a manually operated hospital bed designed to support everyday patient care in clinical and care settings. Its single crank provides a straightforward mechanical way to adjust the backrest, while the bed’s steel frame and included accessories form a practical foundation for routine use. Because the adjustment system is manual, caregivers can operate the bed without relying on electrical power for the described backrest function.

This configuration may suit care environments that need a bed with a defined backrest adjustment, protective side rails and a mattress included as standard. The listed dimensions and load capacity provide key selection details for purchasers comparing equipment with their available space and care requirements. Review the specifications below alongside the intended use and the accessories required for each room or facility.

Specifications and manual adjustment

The specifications below identify the bed size, stated backrest adjustment, loading capacity and principal construction materials. The product information describes the backrest range in two places: the parameter listing gives 0°–80° (±5), while the crank feature description states lifting from 0° to 75°. Refer to the applicable product information when confirming the adjustment range for a purchasing or care requirement.

A direct, power-independent crank system

The single independent manual crank is intended to raise the backrest for supported positioning. The product description identifies sitting up for activities such as eating, reading and rehabilitation as uses for this adjustment. Its mechanical operation does not require electricity for the described backrest movement, which can be useful in settings where a simple manual control is preferred or where power availability is a consideration. Care staff can incorporate the adjustment into routine positioning according to the needs of the patient and the facility’s care practices.

Frame, guardrails and end boards

The bed uses a cold-rolled steel frame, with stainless steel head and tail boards listed among the standard accessories. Together, these components create a durable structural arrangement for use in patient-care spaces. The included aluminum alloy guardrails are described as a safety feature intended to help prevent people and quilts from slipping off the bed; the product information also notes that the rails can be used as walking support. Their presence can assist with everyday bedside routines, while caregivers should continue to follow their own facility procedures for safe patient transfers and rail use.

Folding Aluminum Alloy Guardrail

The folding aluminum alloy guardrail is described as helping keep people and quilts from slipping off the bed. It provides safety protection and can also be used as walking support, offering a functional bedside feature within the bed’s manual configuration.

Cold-rolled steel frame

The integral stamped bed board is perforated to support air circulation across the bed surface. The product description notes that this circulation can help reduce bedsores. This construction detail is relevant for care teams considering airflow as part of regular patient positioning and skin-care practices.

Stainless Steel Head and Tail board

The head and tail boards have a mirror-polished surface. The product information describes this finish as resistant to rust and water and as supporting disinfection. Smooth, rounded edges are also intended to help prevent knocks and bumps, making the end-board design a practical consideration for daily care and cleaning routines.

Single Independent Manual Cranks

The single manual crank controls backrest lifting. The feature description gives a range of 0° to 75° and identifies eating, reading and rehabilitation as situations where a raised backrest can support the patient. The full mechanical structure requires no electricity for operation, allowing the adjustment to be made without power-outage concerns. The crank provides a direct manual control for caregivers during routine repositioning.

Accessories, care routines and application

The JD-DSY-17 comes with a mattress, stainless steel head and tail boards, and aluminum alloy guardrails as standard accessories. Optional items can be selected to suit the intended room setup and care workflow. These include an adjustable IV pole, bedside cabinet, dining table, hospital visitor chair and rehabilitation traction exercise frame. Selecting accessories according to actual requirements can help organize bedside activities and provide additional equipment for the care environment without changing the stated core bed configuration.

For ongoing use, the manual operating method and accessible mechanical controls make this model an option for facilities seeking a non-electric backrest adjustment. Its perforated bed board is designed to promote air circulation, while the polished stainless steel boards are described as facilitating disinfection. As with any care equipment, staff should keep the bed and accessories clean, check them as part of routine facility procedures and use the product in accordance with appropriate patient-care practices.

Before specifying the bed, compare the listed 2140×980×500mm (±20mm) size and 260kg loading capacity with the planned application. Confirm the required backrest adjustment information and determine whether the optional accessories are needed for the room. These checks help purchasers assess the bed’s fit for their operational needs while retaining the simple manual functionality and included features described for the JD-DSY-17.