JD-DSY-02 Two-Crank Manual Hospital Bed Overview
The JD-DSY-02 / 2 Crank Manual Hospital Bed is designed to support patient rest and rehabilitation positioning with a fully mechanical adjustment system. Its two cranks provide manual control of the backrest and leg rest, allowing caregivers to adjust these sections without relying on electrical operation. This straightforward approach can be useful in hospital wards, care environments and patient bedrooms where a manually operated bed is appropriate.
Because adjustment is mechanical, the bed does not require electricity to change the backrest or leg-rest position. Care staff can use the crank controls to select a suitable posture for resting or rehabilitation, while patients can be repositioned as care needs change. The bed combines these adjustable sections with a cold-rolled steel frame, ABS head and tail boards, guardrails, casters and the listed standard accessories.
The design brings key patient-bed functions together in one configuration: manual positioning, a protective guardrail arrangement, central-brake casters and a mattress. Its specifications provide a reference for facilities comparing bed size, adjustment ranges, loading capacity, construction materials and included equipment.
Manual Positioning and Product Specifications
The two-crank system provides separate adjustment for the backrest and leg rest. The specified backrest range is 0°-80°(±5), and the leg-rest range is 0°-35°(±5). These manual functions support changes between resting and other care or rehabilitation postures. The bed size and loading capacity are stated below for product selection and planning.
Item | Parameter |
Bed Size | 2140×980×500mm (±20mm) |
Backrest Adjustment | 0°-80°(±5) |
Leg Rest Adjustment | 0°-35°(±5) |
Loading capacity | 260kg |
Material | Cold-rolled steel frame + ABS headboard |
Standard Accessories | 1. ABS Head and Tail board 2. 6-Section Aluminum Alloy Guardrail 3. 125 mm central-brake casters 4. Mattress 5. Adjustable IV pole |
Optional Accessories | 1. Bedside cabinet 2. Dining Table 3. Hospital Visitor Chair; 4. Rehabilitation traction exercise frame; |
The standard configuration includes ABS head and tail boards, a 6-section aluminum alloy guardrail, 125 mm central-brake casters, a mattress and an adjustable IV pole. Optional items listed for this model are a bedside cabinet, dining table, hospital visitor chair and rehabilitation traction exercise frame. Facilities can review these choices against their room layout and intended care setup when planning an order.
Construction, Guardrails and Everyday Handling
The bed uses a cold-rolled steel frame, with perforated bed panels described as oval hollow punched panels to improve air circulation. The frame construction and ventilated panel design are intended to support routine patient-bed use, including for people who spend extended periods in bed. The product information notes that the ventilation design can help reduce pressure sore risks for long-term bedridden users; care planning and regular patient assessment remain important parts of ongoing care.
The L-shaped aluminum alloy guardrail is foldable and features an orange one-touch release buckle. Its wide protective barrier is designed to help prevent patients from falling, while the release mechanism allows the rail to be folded when access is needed. The six-section aluminum alloy guardrail is included among the standard accessories, providing a practical safety feature for daily bed-side routines.
Two Crank Dual Function Mechanical Adjustment
L-Shaped Foldable Aluminum Alloy Guardrail
ABS Head and Tail board
Perforated, Ventilated, Cold-Rolled Steel Frame
The ABS head and tail boards feature hollow grip grooves and blue corner protectors. The product description identifies the protectors as impact-resistant and wear-resistant, and notes that they are easy to wipe clean of medical stains. These surfaces and features can support routine handling and cleaning as part of the facility’s usual care and maintenance procedures.
Caster Braking, Applications and Care
The 125 mm central-brake casters are operated with a single pedal that locks all wheels at once. This central-brake arrangement supports moving and securing the bed during ward or bedroom use, helping staff transition between repositioning the bed and keeping it stationary. The product description also notes that the casters are intended to move without noise disturbance.
125 mm central-brake casters
For care teams, the combination of manual backrest and leg-rest adjustment, foldable guardrails and centrally operated brakes supports common bed-side tasks without adding electrical adjustment functions. The included adjustable IV pole and mattress complete the standard accessory package, while the optional bedside cabinet, dining table, visitor chair and rehabilitation traction exercise frame allow the setup to be considered alongside the needs of a particular room or care routine.
Routine upkeep can follow the facility’s established procedures for patient beds: keep the bed and accessories clean, check that moving components and guardrail releases operate as intended, and confirm that the caster brake is engaged when the bed needs to remain in place. Refer to the applicable product documentation and local care protocols for inspection and maintenance. With its mechanical operation and clearly specified standard components, the JD-DSY-02 offers a practical manual hospital bed configuration for patient rest and rehabilitation positioning.