JD-YLC3-10 Three-Function Electric Hospital Bed

The JD-YLC3-10 / 3 Function Electric Hospital Bed brings powered positioning and practical bedside equipment together in a single care bed. Its three electric functions support adjustment of the backrest, leg rest, and overall bed height. Staff or caregivers can use the wired electric remote control to make these adjustments, rather than relying only on manual repositioning. The configuration is intended for hospital and care environments where positioning needs may change during daily routines, transfers, rest, or examination.

The bed combines a cold-rolled steel frame with ABS head and tail boards, aluminum alloy guardrails, a mattress, an adjustable IV pole, and silent swivel casters with brakes. Together, these included components provide a functional setup for patient support and routine movement within a care space. The following specifications describe the stated dimensions, adjustment ranges, loading capacity, materials, and included accessory options for this model.

The listed height adjustment range allows the whole bed to be raised or lowered, while the separate backrest and leg-rest ranges let users tailor the bed position to the immediate care task. These are independent stated adjustment functions of the three-function design. The model’s loading capacity is 260kg, and its listed overall size is 2140×980×460-660mm (±20mm). Refer to these specifications when assessing whether the bed is appropriate for the available room layout and intended care requirements.

Powered Positioning, Guardrails, and Bed Mobility

Electric adjustment is useful when a patient’s position needs to be changed as part of ordinary bedside care. The wired control provides an accessible way to operate the bed’s adjustment functions, including changes to the backrest, leg rest, and overall height. This can help caregivers prepare the bed for rest, patient transfer, or examination while keeping the adjustment controls close at hand. The built-in CPR quick-flat reset key is provided for emergency rescue, allowing the bed to be rapidly laid flat with one key.

Aluminum alloy Guardrails

The aluminum alloy guardrails can be fully raised to help stop elderly, disabled, or unconscious patients from falling off the bed. Their quick-release design allows one-hand lowering when access is needed for patient transfer or medical examination. This combination supports a practical balance between a raised bedside barrier and convenient access for caregivers. Staff can lower the rail when carrying out a transfer or examination, then raise it again as appropriate to the care situation.

125 mm Silent Swivel Casters with Brakes

Four double silent rolling wheels make it possible to move the bed between wards and bedrooms. The swivel casters support flexible direction changes during movement, while the brakes can be locked to help prevent the bed from sliding during treatment. This mobility feature is useful when a care space needs to be rearranged or the bed needs to be repositioned. Engaging the brakes after moving the bed helps keep it stationary for bedside care.

The motorized adjustment system is described as using silent, low-noise electric actuators for stable and smooth lifting without shaking. The wired hand control and emergency quick-flat feature serve different purposes: routine position changes are made through the control panel, while the CPR reset key is identified for rapid flattening during emergency rescue. Follow the facility’s care procedures when using adjustment functions and the quick-release guardrails.

Frame, Bed Boards, and Care-Space Components

ABS Head and Tail board

The one-piece molded ABS headboard and footboard are wear-resistant, impact-proof, and easy to wipe clean. Their wipe-clean surfaces support routine bed-area cleaning, while the molded construction provides a coordinated finish at both ends of the bed. The boards are designed to match a range of medical and home care decoration styles, making this bed suitable for different types of care interiors without changing the listed product configuration.

Three-Function Electric Adjustable System with CPR Emergency Button

The bed is equipped with a multi-function wired hand control panel for one-touch electric adjustment. A built-in CPR quick-flat reset key lets the bed be rapidly laid flat for first aid. Silent, low-noise electric actuators provide stable and smooth lifting without shaking. In everyday use, the wired controls support convenient positioning, while the dedicated emergency button provides the stated rapid-flat function when required.

Cold-rolled steel frame 

Perforated cold-rolled steel sheets distribute pressure evenly, provide sturdy support, and allow air to circulate. The stated design helps significantly reduce the risk of pressure ulcers in patients who are bedridden for long periods. The steel frame forms the supporting structure of the bed, while the perforated surface contributes to airflow across the mattress support area. The combination is suited to regular use in patient-care settings.

Materials and component details are relevant when selecting a bed for ongoing care use. The cold-rolled steel frame provides the stated supporting structure, and the ABS head and tail boards are described as easy to wipe clean. Aluminum alloy rails provide bedside barriers, while the casters support repositioning when needed. Together, these features address key practical considerations around support, access, movement, and routine cleaning without changing the bed’s stated dimensions or functional specification.

Standard Equipment, Optional Accessories, and Application

The JD-YLC3-10 is supplied with ABS head and tail boards, aluminum alloy guardrails, 125 mm silent swivel casters with brakes, a mattress, an adjustable IV pole, a wired electric remote control, and an electric motor for medical use. This standard equipment gives purchasing teams a clear starting point for planning a bed setup. Confirm the included configuration when arranging procurement and installation so it can be matched with the requirements of the intended ward, bedroom, or care area.

Optional accessories listed for the model include a bedside cabinet, dining table, hospital visitor chair, and rehabilitation traction exercise frame. These options can be considered according to the way the room is used and the additional equipment needed around the bed. Because accessories are identified as optional, they are separate from the standard accessories listed above. Choosing accessories to suit the care environment can help organize bedside routines and make the available space more useful for patients, visitors, and caregivers.

For day-to-day application, the bed’s three electric adjustment functions, movable base, braking casters, and lowering guardrails offer different practical benefits within one product. The electric adjustments assist with changing bed position, the casters allow movement between care spaces, and the brakes hold the bed in place during treatment. Guardrail access supports transfers and examinations, and the wipe-clean ABS boards contribute to routine surface care. Review the listed dimensions and loading capacity alongside the available room and care needs before selecting this electric hospital bed.