Bed Specifications and Adjustment Range
The three electric adjustment functions address key positioning needs: backrest adjustment, leg rest adjustment, and overall lift and lowering. The backrest adjusts from 0° to 80° (±5), while the leg rest adjusts from 0° to 35° (±5). The bed height changes within the stated 460–660 mm range (±20 mm). These adjustments allow the care team to select a suitable configuration for the task at hand, whether preparing the bed for rest, positioning a patient for assistance, or adapting the working height for caregiver access.
The overall bed size is 2140 × 980 × 460–660 mm (±20 mm), and the stated loading capacity is 260 kg. Its specifications provide a clear reference for planning placement and confirming the bed’s capacity against care requirements. The bed is made with a cold-rolled steel frame and ABS headboard, with ABS head and tail boards listed among the standard accessories. Refer to the values below for the complete parameter summary and supplied configuration.
Item | Parameter |
Bed Size | 2140×980×460-660mm (±20mm) |
Backrest Adjustment | 0°-80°(±5) |
Leg Rest Adjustment | 0°-35°(±5) |
Overall Lift & Down Adjustment | 460-660mm (±20mm) |
Loading capacity | 260kg |
Material | Cold-rolled steel frame + ABS headboard |
Standard Accessories | 1. ABS Head and Tail board 2.Full-height Guardrail 3. 125 mm Silent Swivel Casters with Brakes 4. Mattress 5. Adjustable IV pole 6. Wired electric remote control 7.Electric motor for medical use |
Optional Accessories | 1. Bedside cabinet 2. Dining Table 3. Hospital Visitor Chair; 4. Rehabilitation traction exercise frame; |
Guardrails, Mobility, and Bedside Safety
Full-height guardrails are included as standard equipment. Four independent split guardrails are installed on both sides of the bed, with orange release buttons to support straightforward lifting and lowering. Their reinforced construction is described as durable and resistant to deformation. In daily care, the guardrails provide a raised boundary at the bedside and can be operated by caregivers as needed. Follow the facility’s procedures when positioning or releasing the rails, and check that they are correctly set for the intended use.
The bed is fitted with 125 mm silent swivel casters with brakes. Four double silent rolling wheels support movement between wards and bedrooms, while the brakes are intended to lock the wheels and help prevent the bed from sliding during treatment. This combination can make it easier to reposition the bed for care or room arrangements, then secure it when stationary. Confirm that the brakes are engaged before providing care that requires the bed to remain in place.
Full-height Guardrail
125 mm Silent Swivel Casters with Brakes
Electric Controls, Frame, and Care Features
A wired electric remote control provides operation of the bed’s three adjustment functions. The electric system lets a caregiver change the backrest, leg rest, and bed height without relying solely on manual positioning. Its one-touch electric control is designed to make adjustments accessible during routine bedside care. The electric motor is specified for medical use, and the actuators are described as low-noise, supporting smooth and stable lifting without shaking.
The control system also includes a CPR quick flat reset key. The one-key function rapidly returns the bed to a flat position for first aid, providing an emergency positioning option when needed. Staff should become familiar with the wired controller and the location and operation of this button as part of their normal bed-use procedures.
The cold-rolled steel frame is paired with perforated cold-rolled steel sheets. The perforations are described as helping distribute pressure evenly, providing sturdy support, and allowing air to circulate. These structural characteristics are relevant for extended periods of use, including care for patients who remain in bed for long periods; the product description notes that the design significantly reduces the risk of pressure ulcers. The one-piece molded ABS headboard and footboard are wear-resistant, impact-proof, and easy to wipe clean, offering a practical surface for regular care and cleaning.
ABS Head and Tail board
Three-Function Electric Adjustable System with CPR Emergency Button
Cold-rolled steel frame
Included Equipment, Optional Accessories, and Routine Upkeep
The standard configuration includes ABS head and tail boards, full-height guardrails, 125 mm silent swivel casters with brakes, a mattress, an adjustable IV pole, a wired electric remote control, and a medical-use electric motor. These components provide a ready-to-configure base for patient support, bedside positioning, and movement within a care environment. When planning a purchase, check the standard accessory list against the needs of the intended ward or care setting.
Optional accessories include a bedside cabinet, dining table, hospital visitor chair, and rehabilitation traction exercise frame. These options can be considered to complement the bed for particular room layouts or care activities. Their optional status means they should be selected separately according to the planned application rather than assumed to be part of the standard equipment.
For ongoing care, the ABS head and tail boards are described as easy to wipe clean, supporting routine surface cleaning. As with any electrically adjustable bed, users should follow their facility’s operating and maintenance procedures, inspect the visible components as part of regular upkeep, and check that the caster brakes, guardrails, and wired control are functioning as intended. Keep the bed positioned and adjusted according to the care task, and use the CPR quick flat reset key only in accordance with appropriate emergency procedures.
With its stated adjustment ranges, 260 kg loading capacity, electric controls, and supplied bedside components, the JD-YLC3-01 offers a combination of positioning flexibility and practical day-to-day features. Its steel frame, molded ABS boards, movable casters, and independently operated guardrails are designed to support use in medical and home-care settings. Refer to the parameter table for exact specifications and accessory details when comparing this three-function electric hospital bed with the requirements of your facility.